Need help?Do you have a question about the Sonoff SNZB-02P and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Purpose | Indoor |
| Accuracy | 0.2 °C |
| Material | ABS |
| Sensor type | Temperature & humidity sensor |
| Humidity accuracy | 2 % |
| Connectivity technology | Wireless |
| Sustainability compliance | Yes |
| Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
| Temperature measuring range | - °C |
| Battery type | CR2477 |
| Battery voltage | 3 V |
| Number of batteries supported | 1 |
| Operating altitude | 0 - 5000 m |
| Operating temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Width | 45 mm |
|---|---|
| Height | 17.7 mm |
| Weight | 26.7 g |
| Package depth | 48 mm |
| Package width | 46 mm |
| Package height | 24 mm |
Explains LED flash patterns for pairing and device status.
Real-time detection of ambient temperature and humidity.
Emphasizes the sensor's energy efficiency for long-term use.
Informs users about the device's battery level via the app.
Enables automation and control of other devices through smart scenarios.
Details how to enter pairing mode by pressing and holding the button for 5s.
Step-by-step guide to pairing the sensor with a Zigbee gateway via the eWeLink app.
Method to confirm the sensor is within the Zigbee network's effective range.
Instructions for physically attaching the sensor using included accessories.
Lists key technical details like model, input, wireless connection, and operating conditions.
Procedure to restore the device to its default factory settings via the app.
Important information regarding FCC regulations and potential interference.
Details Canadian regulatory compliance and radiation exposure guidelines.
Specifies minimum safe distance between the device and user for SAR compliance.
To Next Page
