Sonoff SNZB-02P User Manual

English
Product introduction
8
Instruction of LED indicator status
The device weight is less than 1kg , and the equipment is only suitable for mounting
at heights ≤ 2 m
LED indicator
Pairing button
Flash slowly
Keep on for 3s and then keep off
Exit flashing slowly and keep off
Flash once quickly
Flash twice quickly
Pairing mode
Paired successfully
Pairing failed
Not added to the gateway, short press the
Pairing button
Added to the gateway, short press the
Pairing button
Slow flash for 30 seconds Abnormal communication
LED indicator status Status instruction

Sonoff SNZB-02P Specifications

General

Type	Freestanding
Purpose	Indoor
Accuracy	0.2 °C
Material	ABS
Sensor type	Temperature & humidity sensor
Humidity accuracy	2 %
Connectivity technology	Wireless
Sustainability compliance	Yes
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS
Temperature measuring range	- °C
Battery type	CR2477
Battery voltage	3 V
Number of batteries supported	1
Operating altitude	0 - 5000 m
Operating temperature (T-T)	-10 - 60 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Width	45 mm
Height	17.7 mm
Weight	26.7 g
Package depth	48 mm
Package width	46 mm
Package height	24 mm