2. Add sub-de vices
>
ZBB ridge
Add ed:0
No c hild d evice ,plea se add .
Add
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want
to connect, and tap “Add” to add a sub-device. Then
lo n g press reset button on t he device for 5s u ntil the
LED indi c ator flas hes thre e t i mes, whi ch means the
device has entered the pairing mode, and be patient
until pairing completes.
If the addition failed, move the sub-device closer
to the Bridge an d try again.
7
To Next Page
Loading...
