11 AUX In mode
11.1 Operation
Your external player (e.g. mp3 player) must be connected to the auxiliary input jack
of sonoroSTREAM with an audio cable (with 3.5 mm connector, not supplied).
To access the AUX
In mode,
Press
once, then press
◄
or
►
. (or rotate
the navigation knob) to select the AUX In mode
and then press
to confirm.
To start and
control playback,
Perform all playback operations on the
external player.
To mute or restore
the sound output,
Press button.
11.2 Setup menu
Press
in the AUX In mode to access the setup menu (see chapter “Using the
menus”). The following options are available and the current settings (if applicable)
are marked with an asterisk (*).
•
[System Settings]
See chapter “System Settings”.
•
[Main menu]
To access other playback modes, sleep timer or alarms.
© sonoro audio GmbH 2019 73
To Next Page
Loading...
