EasyManua.ls Logo

Sonoro STREAM SO-410 - 16.8 Factory Reset; 16.9 Software Update

Sonoro STREAM SO-410
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16.8 Factory Reset
This option clears all user-defined settings and replaces them with the
original default settings.
16.9 Software update
[Auto Check]
To set to periodically check for update.
[Check now]
To check for update immediately.
If a new software is available, sonoroSTREAM will ask if you want to proceed
with an update.
Before software upgrade, make sure that sonoroSTREAM is connected to a
stable power connection. Disconnecting power during a software update
may damage sonoroSTREAM.
16.10 Setup Wizard
To perform initial setup (see chapter “Performing initial setup”).
16.11 Info
This shows the current software version, spotify version, radio ID and friendly
name.
16.12 Privacy police
Please visit the following page on a PC or mobile device.
www.frontiersmart.com/privacy
16.13 Backlight
[Dimmer level]
To select the brightness level of the display. Options include: [High], [Medium],
[Low] or [Auto].
If [Auto] is selected, the brightness level is automatically adjusted according to
the ambient light sensor at the front of sonoroSTREAM.
84 © sonoro audio GmbH 2019

Table of Contents

Related product manuals