SONOS CONNECT:AMP
5
CONNECT:AMP Back
Ethernet switch connectors (2) You can use an Ethernet cable (supplied) to connect to a router, computer, or additional
network device such as a network-attached storage (NAS) device.
LED indicators:
• Green (link connection)
• Flashing Yellow (network activity)
R
ight speaker terminals Use high-quality speaker wire to connect the right speaker to the CONNECT:AMP.
Left speaker terminals Use high-quality speaker wire to connect the left speaker to the CONNECT:AMP.
Voltage select 100 – 120V~ / 220 – 240V~ 50 – 60 Hz
Select the appropriate voltage setting for your country.
AC power (mains) input Use only the supplied power cord to connect to a power outlet (using a third party power
cord will void your warranty).
Analog audio in You may use a standard RCA audio cable to connect the CONNECT:AMP’s analog audio
inputs to the audio outputs from a separate audio component, such as a CD player or a
portable music player.
Subwoofer output
Note: If you disconnect your subwoofer, make sure to
also disconnect the subwoofer’s cable from the
CONNECT:AMP output.
You may connect a powered subwoofer to this output using a standard RCA cable. The
system will detect when a cable is connected to the subwoofer output and adjust the
crossover frequency automatically.
To Next Page
Loading...
