Product Guide
16
Player Status Indicators
Important Note: Do not place any items on top of your Sonos player. This may impede the
air flow and cause it to overheat.
Indicator Lights Player State Sonos Product Additional Information
Solid white Powered up and associated with a
Sonos system
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
If desired, when the product is in normal operation,
you can turn the white status indicator light on or off
by selecting White Status Light from the Room
Settings menu.
(The SUB indicator will reflect the same setting as
the player it is paired with.)
Flashing white Powering up BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
Flashing green Powered up, not yet associated with
a Sonos system
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP, DOCK,
PLAY:1, PLAY:3, PLAY:5,
PLAYBAR
For a SUB, this may indicate the SUB is not yet paired
with a player.
Solid green Volume set to zero or muted CONNECT,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
Slowly flashing green Surround audio is off or
SUB audio is off
PLAY:1, PLAY:3, SUB Applicable for player configured as a PLAYBAR
surround speaker, or for a SUB paired with a PLAYBAR
Solid orange During wireless setup, this occurs
while the Sonos open access point is
temporarily active.
If you are not setting up your Sonos
system, this may indicate warning
mode.
CONNECT, SUB,
CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
If the orange light is on AND the player’s volume
level automatically reduces, this indicates the player
is in warning mode.
• Press the Pa
use button to stop the audio
• Check the vent slot for adequate cooling
• Check the room temperature to make sure it’s
le
ss than 104°F/ 40° C
• If the player is in direct sunlight, provide
shade
• Allow the player to cool for several minutes
a
nd then press Play to restart the audio
• If the problem does not resolve, please
cont
act Customer Support
To Next Page
Loading...
Need help?
General
Weight and Dimensions
