Bluetooth pairing
1. Turn Bluetooth on in your device settings.
2. Press the mode button on the back of Move to switch to Bluetooth.
3. Choose Move from the list of available devices in your Bluetooth settings. If it’s not there,
press and hold the mode button and choose Move from the list when it appears. You’ll
hear a confirmation tone when your device is paired with Move. They’ll automatically
connect next time you switch Move to Bluetooth.
Switch modes
Set Move up on your WiFi, then use the mode switch on the back of Move to switch between
Bluetooth and WiFi. When you use Bluetooth for the first time, you’ll need to pair Move with
your device. Put it into Bluetooth mode and your mobile device will automatically connect next
time.
To Next Page
Loading...
