42 43
assist with removing moisture/debris from
the tube. See your hearing care professional
for more information.
Cleaning your slim tubes and domes
You should replace the slim tubes and domes
every three to six months or
when they become sti, brittle, or
discolored.
Clean the outside of the domes at
the end of each day with a damp
cloth. Avoid getting any water in and around the
hearing aids.
You should also clean the slim tubes
periodically, with the cleaning pin provided,
when you begin to notice debris in and around
the tubes.
1. Hold the slim tube in one hand and the
hearing aid in the other hand.
2. Gently turn the hearing aid until it detaches
from the slim tube.
3. Use a damp cloth to clean the outside of the
slim tube and dome.
4. Remove the dome from the slim tube by
pulling gently, before cleaning the slim tube.
5. Using the black cleaning
pin provided in the kit,
gently insert the cleaning
pin where the slim tube
attaches to the hearing aid
and push the pin all the way
through the tube.
Note: The slim tubes and domes should never
be rinsed or submerged in water as water drops
may become lodged in the tube, block sound
or damage the electrical components of the
hearing aid.
6. Once the slim tube has been cleaned,
reattach it by gently turning the hearing aid
onto the slim tube.
7. Reattach the dome to the slim tube by gently
pushing it back onto the threading at the
end of the tube. You will feel the dome click
onto the ridges of the slim tube, and you
won’t be able to push it any further.
To Next Page
Loading...
