EasyManua.ls Logo

Sontex Supercom 636 User Manual

Sontex Supercom 636
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Manual
Radio Modem
Supercom 636
Issue:
Rev. 010312
Document:
Manual Supercom 636 R+W rev. 010312
Manufacturer:
Sontex SA
2605 Sonceboz, Switzerland
Phone: +41 32 488 30 00
Fax: +41 32 488 30 01
Email: @sontex.ch
Internet: .sontex.ch
Technical modifications subject to change without notice
Question and Answer IconNeed help?

Do you have a question about the Sontex Supercom 636 and is the answer not in the manual?

Sontex Supercom 636 Specifications

General IconGeneral
Frequency band868 MHz
Operating temperature-20°C to +55°C
Protection classIP65
ModulationFSK
Output Power25 mW
Power supplyBattery or external power
Battery3.6 V Lithium battery
Frequency Range868 MHz

Summary

How to Use the Radio Modem

3.1.3 Bluetooth Connection

Provides step-by-step instructions for establishing a Bluetooth connection with the modem.

3.1.5 Accumulator Charging

Details charging requirements, recommended battery types, and disposal guidelines for the device.

Communication Protocols and Concepts

4.1.1 Reading Data Concept

Outlines the concept of reading data from the modem and connected devices, including addressing.

4.1.2 Detailed Reading Steps

Presents the frame structure for requesting modem information using M-Bus commands.

Detailed Errors Interpretation

Explains the meaning of various error bits reported in the modem's status byte.

Status Byte Interpretation

Details the interpretation of different status bits for device operation and errors.

Reading Process Commands

Describes commands and logic for initiating and completing a data read process.

Utilities and Maintenance

5.1 Firmware Update

Guides on updating the modem's firmware using the Tools636 software via USB.

Annex A: Reading Process

Annex B: Device List for Reading

Annex C: Encoded Frames

Annex D: Writing Process

Annex E: Writing Data