Getting started: Using the T68 as a modem
5
8.On the Server Types tab:
• In the Type of Dial-Up Server box, select PPP.
Under Advanced options:
• Make sure all check boxes are cleared. However, Record a log file for connection is optional.
Under Allowed network protocols:
• Select the TCP/IP check box. The other check boxes should be cleared.
9. Click the TCP/IP Settings button.
• Select Server assigned IP address.
• Select Server assigned name server addresses.
Note: With some operators you have to select Specify name server addresses. If you
cannot browse the Internet after a connection has been established, check with your GSM
operator what name server address (DNS) to use.
• Use IP header compression should be cleared.
• Select Use default gateway on remote network.
10.Click OK twice to save the settings.
To Next Page
Loading...
