If [Focus Mode] is set to [Continuous AF], the camera will not beep when it focuses on a
subject.
[200] How to Use
Changing settings Setup menu
Upload Settings(Eye-Fi)
Sets whether to use the upload function when using an Eye-Fi card (commercially
available). This item appears when an Eye-Fi card is inserted into the product’s memory
card slot.
1. MENU → (Setup) → [Upload Settings] → desired setting.
2. Set your Wi-Fi network or destination on the Eye-Fi card.
For details, refer to the manual supplied with the Eye-Fi card.
3. Insert the Eye-Fi card you have set up into the product, and shoot still images.
Images are transferred to your computer, etc., automatically via the Wi-Fi network.
Menu item details
On:
Enables the upload function.
Off:
Disables the upload function.
Communication status screen display
: Standby. No images are to be sent.
: Upload standby
: Connecting
: Uploading
: Error
Note
Eye-Fi cards are only sold in certain countries/regions.
For more information on Eye-Fi cards, please contact the manufacturer or vendor directly.
Eye-Fi cards can be used only in the countries/regions where they were purchased. Use
Eye-Fi cards in accordance with the law of the countries/regions where you purchased
the card.
Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi card into
the product in locations in which their use is prohibited, such as on an airplane. When an
Eye-Fi card is inserted into the product, set [Upload Settings] to [Off]. When the upload
To Next Page
Loading...
