Available for external recorders/players compatible with [ REC Control].
When [ TC Output] is [Off], [ REC Control] is set to [Off].
Even when is displayed, the external recorder/player may not work properly
depending on the settings or status of the recorder/player. Check if the external
recorder/player works properly before use.
[217] How to Use
Changing settings Setup menu
4K Output Sel. (movie)
You can set how to record movies and perform HDMI output when your camera is connected
to 4K-compatible external recording/playback devices, etc.
1. Turn the mode dial to (Movie/HFR).
2. Connect the camera to the desired device via an HDMI cable.
3. MENU→ (Setup)→[ 4K Output Sel.]→desired setting.
Menu item details
Memory Card+HDMI:
Simultaneously outputs to the external recording/playback device and records on the
camera's memory card.
HDMI Only(30p):
Outputs a 4K movie in 30p to the external recording/playback device without recording on
the camera's memory card.
HDMI Only(24p) :
Outputs a 4K movie in 24p to the external recording/playback device without recording on
the camera's memory card.
HDMI Only(25p) *:
Outputs a 4K movie in 25p to the external recording/playback device without recording on
the camera’s memory card.
*
Only when [NTSC/PAL Selector] is set to PAL.
Note
This item can be set only when the camera is in movie mode and connected to a 4K-
compatible device.
When [HDMI Only(30p)], [HDMI Only(24p) ] or [HDMI Only(25p) ] is set, the
To Next Page
Loading...
