Only available when using lenses that support Direct Manual Focus.
Even if [Priority Set in AF-S] is set to [Balanced Emphasis], the camera will temporarily
switch to [AF].
Even if [Priority Set in AF-C] is set to [Balanced Emphasis], the camera will temporarily
switch to [Release].
Available focus area
Wide:
The product automatically selects a focus area from among 15 areas.
Center:
The product uses the focus area located in the center area exclusively.
Flexible Spot:
You can select a focus area from 15 areas using the control wheel.
Lock-on AF:
When you press the shutter button halfway down, the product will start tracking a subject
from the selected AF area.
[294] How to Use Precautions/This product Other information
LA-EA3 Mount Adaptor
If you use the LA-EA3 Mount Adaptor (sold separately), the following functions are available.
Autofocus:
Available with SAM/SSM lens only
AF system:
Contrast AF/Phase Detection AF
AF/MF select:
Can be changed using the operating switch on the lens.
Focus Mode:
Single-shot AF/Continuous AF*
*
This setting is unavailable when [ AF System] is set to [Contrast AF].
When using a Mount Adaptor and the camera is set to movie mode, the Auto Focus only
works when the shutter button is pressed halfway down.
When using a Mount Adaptor in movie mode, adjust the aperture manually.
Available focus area
When the LA-EA3 Mount Adaptor is mounted, the available focus areas are the same as for
the available settings of this camera.
[Zone], [Expand Flexible Spot] or [Lock-on AF] cannot be selected when [ AF System] is
set to [Phase Detection AF].
To Next Page
Loading...
