The FEL lock cannot be set when a flash is not attached.
If a flash that does not support the FEL lock is attached, an error message is displayed.
When both AE and FEL lock are fixed, lights up.
Hint
By setting [FEL Lock hold], you can hold the setting while the button is pressed down.
Also, by setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.], you can shoot images
with the AE locked in the following situations.
When [Flash Mode] is set to [Flash Off] or [Autoflash].
When the flash cannot go off.
[56] How to Use Using shooting functions Selecting a screen display mode
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes.
Graphic Display
Display All Info.
No Disp. Info.
To Next Page
Loading...
