Sony AC-500CE - Location of Parts and Controls

1-3. LOCATION OF PARTS AND CONTROLS
POWER switch
(CAMERA connector
Q) DC OUT connector
B) MIC OUT connector
Voltage selector (4) EXT VBS connector
~ AC IN connector (5) VIDEO OUT connector
@) CAMERA connector @) DC OUT connector
14-pin multiple connector — for CCQ cable XLR-4P connector —for DC cord
Pin arrangement Pin arrangement
1 DC(GND) 1 GND
2 DC12.3V 2
3
MIC
3
4 NG 4 +12.3V
5 MIC (GND)
abredandis @) MIC OUT connector
7 VIDEO (GND) XLR male connector — for shielded cable
8 —60 dB, 600 ohms, balanced.
9
a sh @) EXT VBS input connector
BATT INDICATOR out BNC connector —for coaxial cable
REC lamp out Accepts VBS (1.0 Vp-p) input signal.
+12V out (REC lamp)
RECSIG IN (5) VIDEO OUT connector
BNC connector — for coaxial cable
composite video 1.0 Vp-p
Power saving signal in