178
GB
Table of
contents
Sample photo Menu Index
The camera does not work properly.
• Turn off the camera. Remove the battery pack and insert it again. If the camera is hot, remove the
battery pack, and allow it to cool down before trying this corrective procedure.
• If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power
cord and turn on the camera again. If the camera does not work after trying these solutions, consult
your Sony dealer or local authorized Sony service facility.
“--E-” appears on the screen.
• Remove the memory card, and insert it again. If the problem persists even after performing this
procedure, format the memory card (page 152).
To Next Page
Loading...
