EasyManua.ls Logo

Sony AVD-K800P User Manual

Sony AVD-K800P
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AVD-K800P
US Model
Canadian Model
AEP Model
UK Model
E Model
SERVICE MANUAL
COMPACT AV SYSTEM
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-877-319-01
2003E16-1
© 2003.05
Ver 1.0 2003. 05
Model Name Using Similar Mechanism NEW
Mechanism Type
CDM79-DVBU22
Optical Pick-up Name
TDP022W
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 20,000 Hz; rated 60
watts per channel minimum RMS power , with no more than 0.7 % total
harmonic distortion from 250 milliwatts to rated output (USA model only).
Amplifier section
Rated Power Output at Stereo Mode
60 W + 60 W (6 ohms, at 1 kHz, THD 0.7 %)
Reference Power Output
Front: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Center*: 100 W (6 ohms at 1 kHz, THD 10 %)
Surround*: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Sub woofer*: 100 W (6 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog) ANALOG IN:
Sensitivity: 500 mV
Impedance: 50 kilohms
Outputs (Analog) PHONES:
Accepts low- and high-impedance headphones
CD/DVD system
Laser Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
Signal format system NTSC/PAL or NTSC
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
Signal-to-noise ratio More than 80 dB
Harmonic distortion Less than 0.03 %
FM tuner section
System PLL quartz-locked digital synthesizer system
Tuning range
North American models: 87.5 – 108.0 MHz (100 kHz step)
Other models: 87.5 – 108.0 MHz (50 kHz step)
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
System PLL quartz-locked digital synthesizer system
Tuning range
North American models: 530 – 1,710 kHz (with the interval set at 10 kHz)
531 – 1,710 kHz (with the interval set at 9 kHz)
European models: 531 – 1,602 kHz (with the interval set at 9 kHz)
Mexican models: 530 – 1,610 kHz (with the interval set at 10 kHz)
Other models: 530 – 1,610 kHz (with the interval set at 10 kHz)
531 – 1,602 kHz (with the interval set at 9 kHz)
Antenna AM loop antenna
Intermediate frequency 450 kHz
Video section
Inputs Video: 1 Vp-p 75 ohms
Outputs Video: 1 Vp-p 75 ohms
Component: Y: 1 Vp-p 75 ohms
P
B
/C
B
: 0.7 Vp-p 75 ohms
P
R
/C
R
: 0.7 Vp-p 75 ohms
General
Power requirements
North American and Mexican models:
120 V AC, 60 Hz
European models: 230 V AC, 50/60 Hz
Other models: 120/220 V AC, 50/60 Hz
Power consumption
Canadian models: 240 VA
Other models: 190 W
Power consumption (at Power Saving Mode):
0.5 W
Dimensions (approx.) 430 × 170 × 450 mm (17 × 6
7
/8 × 17
7
/8 inches)
(w/h/d) incl. projecting parts
Mass (approx.) 11.5 kg (25 lb 6 oz.)
Operating temperature 5˚C to 35˚C (41˚F to 95˚F)
Operating humidity 5 % to 90 %
Design and specifications are subject to change without notice.
This system incorporates with Dolby* Digital and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license from Digital Theater Systems, Inc.
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
AVD-K800P is the amplifier, CD/DVD and tuner system in HT-C800DP.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sony AVD-K800P and is the answer not in the manual?

Sony AVD-K800P Specifications

General IconGeneral
BrandSony
ModelAVD-K800P
CategoryStereo Receiver
LanguageEnglish

Summary

System Specifications

Audio Power Performance

Details on power output, harmonic distortion, and amplifier section parameters.

Component Specifications

Specifications for CD/DVD system, FM/AM tuners, video section, and general unit properties.

Safety, Handling, and Repair

Critical Safety Warnings and Precautions

Essential safety information including component warnings, laser hazards, and AC leakage checks.

Repair and Handling Guidelines

Procedures for handling optical pick-ups, checking laser diodes, and repairing flexible circuit boards.

Unit Operation and Control

Front and Rear Panel Layouts

Diagrams showing the location and function of front and rear panel interfaces.

Remote Commander Functions

Guide to operating the unit remotely, detailing each button's function.

Disassembly Procedures

Step-by-Step Disassembly Guide

Detailed procedure for disassembling the unit, covering case, panels, boards, and mechanism.

Test Modes and Diagnostics

System Test Mode Procedures

Instructions for utilizing various diagnostic test modes like version check and key check.

Drive System Tests and Adjustments

Detailed steps for disc type identification, servo control, and drive system adjustments.

Diagrams and Schematics

Circuit Board Locations and Block Diagrams

Identification of board layouts and high-level functional block diagrams for system sections.

Section Schematics and Waveforms

Electrical schematics for RF, DMB, I/O, and Main sections, plus key signal waveforms.

IC Block Diagrams and Pinouts

Block diagrams and pin function descriptions for major ICs used in the system.

Exploded Views and Parts Lists

Exploded Views of Assemblies

Visual guides for case, panel, chassis, and mechanism assemblies with part references.

Electrical Component Listing

Detailed listing of capacitors, resistors, ICs, transistors, and other components by part number.

Revision History

Service Manual Revision Log

Log of manual revisions, including version number, date, and description of changes.

Related product manuals