Chapter 3 Operations
166
Controlling Cameras
A camera guide menu appears in the menu display.
2
With the jog roller, select [Control Setup], and confirm.
3
In the submenu, select [Reset Camera], and confirm.
You can also reset the camera by holding down the SHIFT button and
pressing the numeric 0 button.
Linking the VISCA Camera’s Power to the Unit’s Power
By linking the power, you can have the VISCA camera’s power turn off when the
unit is turned off.
When the unit is turned on, all of the VISCA cameras connected to the VISCA
connector will also turn on.
1
Press the MENU button.
2
In the top menu, select [Video Utility].
3
Select [VISCA Power Control] to set it [On], and confirm.
The setting turns on or off each time it is selected.
4
Press the MENU button to close the menu.
Note
Note
Pan - Tilt Enable
Pan Reverse Off
Tilt Reverse Off
Zoom Enable
Focus Auto
Iris(Exposure) Auto
White Balance Disable
R Gain 210
B Gain 155
Reset Camera SHIFT z+ -
Remote Switching
VISCA Power Control On
To Next Page
