Sony BDV-E3200 - Parental Control and System Settings

45
GB
BDV-E3200
4-446-734-81(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4446734811_GB (E3200)\090SET.fm
masterpage:
Right
Settings and Adjustments
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet
connection.
[Parental Control
Settings]
x [Password]
Set or change the password for the
Parental Control function. A password
allows you to set a restriction on
BD-ROM, DVD VIDEO, or Internet video
playback. If necessary, you can
differentiate the restriction levels for
BD-ROMs and DVD VIDEOs.
x [Parental Control Area Code]
Playback of some BD-ROMs or DVD
VIDEOs can be limited according to the
geographic area. Scenes may be
blocked or replaced with different
scenes. Follow the on-screen
instructions and enter your four-digit
password.
x [BD Parental Control]/[DVD
Parental Control]/[Internet Video
Parental Control]
By setting Parental Control, scenes can
be blocked or replaced with different
scenes. Follow the on-screen
instructions and enter your four-digit
password.
x [Internet Video Unrated]
[Allow]
: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
[System Settings]
x [OSD Language]
You can select the language you want
for the system on-screen display.
x [Main Unit illumination]
[On]: The front panel display is always
turned on and the brightness of the LED
indicator is the maximum.
[Auto]: The front panel display is turned
off and the brightness of LED indicator is
reduced automatically if you do not
operate the system for about
10 seconds.
x [HDMI Settings]
[Control for HDMI]
[On]: Turns on the [Control for HDMI]
function. You can operate mutually
between equipment that are connected
with an HDMI cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you
connect the system to a TV’s HDMI IN
jack that is compatible with the Audio
Return Channel function and [Control
for HDMI] is set to [On].
[Auto]: The system can receive the
digital audio signal of the TV
automatically via an HDMI cable.
[Off]: Off.
x [Quick Start Mode]
[On]: Shortens the startup time from
standby mode. You can operate the
system quickly after turning it on.
[Off]: The default setting.