48
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Left
[Audio Return Channel]
This function is available when you
connect the system to a TV’s HDMI IN
jack that is compatible with the Audio
Return Channel function and [Control for
HDMI] is set to [On].
[Auto]
: The system can receive the digital
audio signal of the TV automatically via an
HDMI cable.
[Off]: Off.
When you set the [Quick Start Mode] to [On], the
[Control for HDMI] is automatically set to [Off].
x [Quick Start Mode]
[On]: Shortens the startup time from
standby mode. You can operate the system
quickly after turning it on.
[Off]
: The default setting.
When you set the [Control for HDMI] or [Remote
Start] to [On], the [Quick Start Mode] is
automatically set to [Off].
x [Auto Standby]
[On]
: Turns on the [Auto Standby]
function. When you do not operate the
system for about 30 minutes, the system
enters standby mode automatically.
[Off]: Off.
x [Auto Display]
[On]
: Automatically displays information
on the screen when changing the viewing
titles, picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Screen Saver]
[On]
: Turns on the screen saver function.
[Off]: Off.
x [Software Update Notification]
[On]
: Sets the system to inform you of
latest software version information
(page 43).
[Off]: Off.
x [Gracenote Settings]
[Auto]
: Automatically downloads disc
information when you stop playback of the
disc. To download, the system must be
connected to the network.
[Manual]: Downloads disc information
when [Video Search] or [Music Search] is
selected.
x [System Information]
You can display the system’s software
version information and the MAC address.
x [Software License Information]
You can display the Software License
Information.
[Network Settings]
x [Internet Settings]
Connect the system to the network
beforehand. For details, see “Step 3:
Preparing for Network Connection”
(page 18).
[Wired Setup]
: Select this when you
connect to a broadband router using a LAN
cable.
[Wireless Setup(built-in)]: Select this when
you use the built-in wireless LAN of the
system for wireless network connection.
For further details, visit the following website and
check the FAQ:
http://support.sony-europe.com/
Note
Note
Tip
To Next Page
Loading...
