Sony BKM-101C - Page 3

3
Installation
Continue
1 Remove the rear cover of the monitor.
Remove 10 screws.
3 Pull out the connector panel.
2 Remove the G board and attach it again as
in the illustration.
G board
G board
4 (only for 20-inch monitors, except PVM-
20S1WE/20S1WU/20S1WA)
Install the supplied adaptor fitting for 20-
inch monitors.
Adaptor fitting for
20-inch monitors
Supplied screw
(+BVTT 4 × 8)
1
2