Sony BVE-600 - Page 32

(6) SWITCHER KEY CODE
e@ Switcher key in block
KEY BOARD ENCODER
Address Function
* 1 Used for data read and write (8-bit).
* 2 Used for command write and read (8-bit).
It is used for data loading ; LED display ; and two-digit, seven-segment LED display (transition time) using
KEY DATE KEY NAME
D4 TITLE
D5 R RESET
DD
switcher’s key.
@ SWITCHER KEY data to NAME
KEY DATE KEY NAME
KK,
B BUSS BACK GRND
P2 RESET
A BUSS P1
A BUSS P2
Set the CTL/ TC U-BIT switch to U-BIT and turn on the power. The key code above is displayed on the 7-segment LED
(for
TRANSITION
TIME).
3-14