151
“Memory Stick
” Operations
– Recording
Notes
•Sound recorded in 48 kHz is converted to 32 kHz sound when recording pictures from
a tape to a “Memory Stick.”
•Sound recorded in stereo is converted to monaural sound when recording from a tape.
•The moving picture files recorded on your camcorder cannot be played back on other
camcorders without the folder creation function.
When the access lamp is lit or flashing
Do not shake or knock your camcorder. Also, do not set the POWER switch to OFF,
eject a “Memory Stick” or remove the battery pack. Otherwise, image data may become
damaged.
Titles
You cannot record titles on the “Memory Stick.” However, you can record titles which
have already been recorded on tapes.
Data code
The data code (date/time) when it is recorded on the “Memory Stick” from a tape is
recorded.
The data code (various settings) is not recorded.
The data codes recorded on a tape are not recorded.
If “ AUDIO ERROR” is displayed
Sound that cannot be recorded by your camcorder has been recorded on the tape.
Connect external equipment with the A/V connecting cable and input images played
back on it (p. 152).
The picture may be recorded on the “Memory Stick” incorrectly if:
– You turn the POWER switch during recording.
– You press any video control buttons during recording.
– Between the scenes recorded in the Digital8 system and in the Hi8 /
standard 8 mm system.
– A blank portion of the tape.
– The scenes when the input signal is cut off.
Recording folder
You cannot change the recording folder.
The recording folder you selected when the POWER switch was set to MEMORY is
used (p. 162).
Recording pictures from a tape as a moving picture
To Next Page
Loading...
Need help?
General