When watching on the LCD screen
You can turn the LCD pane! over and move back to the camcorder with the LCD screen
facing out. [a]
You can change the angle of the LCD panel. [b]
[a] [b]
Using the Remote Commander
You can control playback using the supplied Remote Commander.
Before using the Remote Commander, insert the size AA (R6) batteries.
Note on DISPLAY button
Press DISPLAY to erase the screen indicators on the LCD screen. To display the
indicators, press again.
The indicators don't appear on the TV.
Using an earphone
Connect an earphone (not supplied) to the ® jack. You can adjust the volume of the
earphone using VOL.
To view the playback picture in the viewfinder
Close the LCD panel The viewfinder turns on automatically. When using the
viewfinder, you can monitor the sound only by using an earphone.
To view on the LCD screen again, open the LCD panel. The viewfinder turns off
automatically.
Various playback modes
To view a still picture (playback pause)
Press II during playback. To resume playback, press II or I_.
TO locate a scene (Picture Search)
Keep pressing _ or _ during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing the tape or rewind
(Skip Scan)
Keep pressing _ while rewinding or _ while advancing the tape.
To resume normal playback, press IP'-.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When playback pause mode lasts for 5 minutes more, the cameorder automatically
enters stop mode.
m
o
17 •
To Next Page
Loading...
Need help?
General