54
When the Steady Shot function is working, the camcorder compensates for camera-
shake.
You can release the Steady Shot function when you do not need to use the Steady Shot
function. The “ ” indicator appear in the viewfinder or on the LCD screen. Do not use
the Steady Shot function when shooting a stationary object with a tripod.
You can select ON or OFF in the menu system (p. 28).
To activate the Steady Shot function again
Set STEADYSHOT to ON in the menu system.
Notes on the Steady Shot function
•The Steady Shot function will not correct excessive camera-shake.
•When you set STEADYSHOT to ON or OFF in the menu system, the exposure may
fluctuate.
•Steady Shot does not operate in 16:9 FULL mode. If you set STEADYSHOT to ON in
the menu system, the indicator flashes.
Releasing the STEADY SHOT function
To Next Page
Loading...
Need help?
General