28
Editing stored information
You can edit the name, phone number and memory location of specific
entries stored in the Phone Book.
1 On the standby display, turn
once.
The Saved #s display appears.
2 Turn
–
down to select “Phone
Book”.
The first entry in the Phone Book appears.
3 Turn to select the entry that contains the
information you want to edit.
The contents of the selected memory location are displayed.
4 Push .
The Options menu appears.
5 Turn to select “Edit”, then push .
The Edit menu appears.
6 Turn to select the item you want to edit,
then push
.
The stored information that corresponds to the selected item
appears.
7 Enter the new information.
Enter new information the same way you stored original
information (see page 25). The old information is overwritten.
8 When you are finished, push .
The Options menu reappears when you edit the phone
number. New information is saved immediately when you edit
the name or memory location.
9 Turn to select “Save”, then push .
A message appears confirming that your changes have been saved.
Tip
You can also use the Directory menu to edit Phone Book numbers (see page 51).
SAVED #S
:Calls List
:Phone Book
:Find Name
B2200 25-38draft3 8/21/98, 12:12 PM28
To Next Page
Loading...
