49
Advanced
Features
4 Use the number buttons to enter the name.
Use / to move the cursor or to insert spaces
between characters. If you enter the wrong character,
press
CLR
to clear the character highlighted by the
cursor. (See the “Alphanumeric table” on page 20.)
5 When you are finished, push to store the
phone number and name.
A confirmation message appears.
6 Push to store the new number in the first
available memory location.
If you want to store it in another
location, turn to select the desired
location, then push . A confirmation
message appears, followed by the status
of the Phone Book.
Tip
You can also use the Options menu to store Phone Book numbers (see page 25).
PHONE BOOK
LOCATIONS:
21 used
78 empty
B2200 39-55draft3 8/21/98, 12:13 PM49
To Next Page
Loading...
