Sony CMT-EP707 Operating Instructions (CMTEP707) - Connecting Optional Components; Hooking Up External Audio Devices; Recording from;to Connected Components

18
GB
Optional Components
Hooking up optional components
You can connect a digital or an analogue component to this system.
Optional analogue
component
A MD IN jacks
Use audio cords (not supplied) to connect an
optional component (such as an MD player) to
these jacks. You can then record or listen to
analogue audio from that component through
this system.
B OPTICAL DIGITAL OUT jack
Use a digital cable (square, not supplied) to
connect an optional digital component (such as
an MD recorder) to this jack. You can then
make a digital recording from this system to
that digital component.
Listening to audio from a
connected component
1 Connect the audio cords.
See “Hooking up optional components”
above.
2 Press MD to switch the function to MD.
Start playing the connected component.
From the audio output
jacks of an analogue
component
Optional digital
component
To the digital input jack of a
digital component
Recording a CD on a
connected digital
component
1 Connect the digital cable.
See “Hooking up optional components”
above.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Recording audio from a
connected component
1 Connect the audio cords.
See “Hooking up optional components”
above.
2 Start recording manually.
See “Recording to a tape” on page 14.