EasyManua.ls Logo

Sony CMT-SE7 - Specifications

Sony CMT-SE7
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Information
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB14INF-CEK.fm]
model name[CMT-SE7]
[4-248-325-11(2)]
95
GB
Guide to the Serial Copy Management
System
Digital audio components, such as CDs, MDs, and
DATs let you copy music easily with high quality by
processing music as a digital signal.
To protect the copyrighted music programs, this
system uses the Serial Copy Management System that
allows you to make only a single copy of a digitally
recorded source through digital-to-digital connections.
You can make only a first generation copy*
through a digital-to-digital connection.
For example:
1 You can make a copy of a commercially
available digital sound program (for example, a
CD or MD), but you cannot make a second
copy from the first-generation copy.
2 You can make a copy of a digital signal from a
digitally recorded analog sound program (for
example, an analog record or a music cassette
tape) or from a digital satellite broadcast
program, but you cannot make a second copy.
* A first-generation copy means a digital recording of
a digital signal made on digital audio equipment. For
example, if you record from this system’s DVD
player to the MD deck, you make a first-generation
copy.
Main Unit (HCD-SE7)
Amplifier section
DIN power output (rated): 20 + 20 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
25 + 25 W
(6 ohms at 1 kHz,
10% THD)
Music power output (reference):
45 + 45 W
Inputs
TAPE IN (phono jack):
Voltage 250 mV,
impedance 47 kilohms
DIGITAL OPTICAL IN:
Supported sampling
frequencies: 32 kHz,
44.1 kHz and 48 kHz
(PCM only)
Outputs
TAPE OUT (phono jacks):
Voltage 250 mV,
impedance 1 kilohm
DIGITAL OPTICAL OUT:
Optical
Wavelength: 660 nm
PHONES (stereo mini phone jack):
Accepts headphones of
16 ohms or more
VIDEO OUT (phono jack):
Max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
S-VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced,
Sync negative
C: 0.286 Vp-p, load
impedance 75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
P
B
, P
R
: 0.7 Vp-p, 75 ohms
DVD player section
System Compact disc, digital
audio and video system
and Super Audio CD
Specifications
continued

Table of Contents