Sony CMT-X7CD - Running the DAB Automatic Scan Manually (CMT-X7 CDB Only)

14
GB
To tune in to a preset radio
station
Press PRESET +/– to select the preset
number to which the desired station is
registered.
Before you can tune in DAB/DAB+ stations,
you must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press MENU.
2
Press / to select
“TUNE:MENU,” then press .
3
Press / to select “INIT:SCAN,”
then press .
4
Press / to select “OK,” then
press .
Scanning begins. The scanning
progress is indicated by asterisks
(*******). Depending on the DAB/DAB+
services available in your area,
scanning may take a few minutes.
Note
 If your country or region does not support DAB/
DAB+ broadcast,“NO SERV” appears.
 This procedure clears all previously stored
presets.
 Before unplugging the DAB/FM lead antenna,
make sure the system is turned off to preserve
your own DAB/DAB+ settings.
Running the DAB
Automatic Scan manually
(CMT-X7CDB only)