20
GB
Playing with high
quality sound codec
(AAC/aptX)
You can receive the data in AAC or aptX
codec format from a BLUETOOTH device. It
provides the playback with a higher quality
sound.
The factory settings of “BT AAC” and “BT
APTX” are “ON.”
1
Press MENU.
2
Press / to select “BT MENU,”
then press .
3
Press / to select “BT AAC”
(AAC codec) or “BT APTX” (aptX
codec), then press .
4
Press / to select “ON,” then
press .
If you initiate setup during BLUETOOTH
connection, the connection is cut.
If sound is interrupted during reception in AAC
codec format, set to “OFF” in step 4 to cancel the
settings. In this case, the system receives SBC
codec.