Sony CMT-X7CD - Additional Information; Setting the Automatic Standby Function

27
GB
Additional information
Setting the
Automatic Standby
function
The system enters Standby mode
automatically in about 15 minutes when
there is no operation or audio signal output
(Automatic Standby function).
By default, the Automatic Standby function
is turned on.
1
Press MENU.
2
Press / to select “STBY:MODE,”
then press .
3
Press / to select “AUTO:STBY,”
then press .
4
Press / to select “ON” or “OFF,”
then press .
Tip
 2 minutes before entering Standby mode,
“AUTOSTBY” displays in the display window.
Note
 The Automatic Standby function is invalid for the
tuner function (FM/DAB
*
), even when you have
enabled it.
 The system may not enter Standby mode
automatically in the following cases:
 while using the FM or DAB* function
 while an audio signal is being detected
 during playback of audio tracks or files
 while the Play Timer or Sleep Timer is being
used
 The system counts down the time (about
15 minutes) again until it enters Standby mode,
even when Automatic Standby function is
enabled in the following cases:
 when a USB device is connected in USB
function
 when a button on the remote or unit is
pressed
* DAB is for CMT-X7CDB only.
Additional information