9
GB
Getting started
Setting the clock
1
Press / to turn on the system.
2
Press TIMER.
If “PLAY SET” is displayed, press / to
select “CLOCK,” then press .
3
Press / to set the hour, then
press .
4
Press / to set the minutes,
then press .
Complete the clock setting.
The clock settings are reset when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY repeatedly to display the
clock. The clock is displayed for about 8
seconds.
If the BLUETOOTH/Network Standby mode is
on, the clock does not appear by pressing
DISPLAY.
To Next Page
Loading...
