Sony CMT-X7CD - Adjusting the Sound; Using the Timers; Setting the Sleep Timer; Setting the Play Timer

29
GB
Additional information
Adjusting the sound
You can set the bass and treble or adjust the
tone to your preferences.
1
Press SOUND.
2
Press / to select “CA+,” “P-EQ”
(sound effect), or “WIDE ST”
(stereo effect), then press .
CA+: Set to the recommended sound
quality of Sony.
P-EQ (EQUALIZER): Select the desired
sound from the following styles:
“R AND B/HIP HOP,” “ROCK,” “POPS,”
“CLASSIC,” “JAZZ,” “FLAT,” “CUSTOM”
WIDE ST (WIDE STEREO): Select “HIGH”
or “NORMAL,” then press . If you
want to adjust to a more natural stereo
sound, select “NORMAL.”
Using the timers
The system offers Sleep Timer and Play
Timer.
Note
 The Sleep Timer has priority over the Play Timer.
At the specified time, the system is turned
off automatically.
1
Press MENU.
2
Press / to select “SLEEP,” then
press .
3
Press / to select the specified
time, then press .
You can select from “10MIN” (10
minutes) to “90MIN” (90 minutes) in 10-
minute increments.
Tip
 To check the remaining time of Sleep Timer,
perform steps 1 and 2 above.
 The Sleep Timer works even if the clock is not
set.
To cancel the Sleep Timer
Select “OFF” in step 3 above.
Note
 Make sure you have set the clock before setting
the timer (page 9).
Play Timer
You can listen to a CD, USB device or radio
every day at a preset time.
The Play Timer setting remains as long as
the setting is not canceled.
Setting the Sleep Timer
Setting the Play Timer