COM-2.US.3-213-855-11(1)
11
11
Make sure that the battery is charged first. For how to connect the unit, refer to
page 9.
POWER indicatorPOWER/HOLD switch
Slide and hold the POWER/HOLD switch toward the direction of the
arrow.
The unit turns on, and the POWER indicator lights up green.
When you turn on the unit for the first time, the initial set-up wizard
appears after about 1.5 minutes. Follow the instructions on the display to
set-up.
Normally, the last screen viewed is restored whenever the power is turned
back on.
Slide and hold the POWER/HOLD switch toward the direction of the arrow.
The POWER indicator goes out.
Notes
Do not remove the battery or disconnect the AC adapter while the start-up screen is
displayed.
If it has been more than 8 days since the last time the unit was used, the Home menu is
displayed about 1.5 minutes after the start-up screen appears.
While the start-up screen is being displayed, you cannot turn off the unit.
If the power is turned on or off in a way other than stated above (for example, taking out the
battery or pressing the RESET button), some data stored may be damaged or erased. Be sure
to turn on and off the power using the POWER/HOLD switch.
This unit automatically turns itself off (Auto Power Off) in 5 minutes (default setting) from
the last operation, unless it is playing back music or video, or while the AC adapter is
connected. To clear the setting or change the value, see
page 152.
About the initial set-up wizard, see
page 27.
To Next Page
Loading...
Need help?
General