COM-2.US.3-213-855-11(1)
131
131
Connect the unit to the computer with the supplied USB cable.
To
(USB)
connector
USB cable (supplied)
While the unit is connected to the computer, a screen showing the USB
connection mode appears.
After the transfer finishes, make sure the unit does not display “Do Not
Disconnect,” and then use the safely remove hardware function of the computer
before disconnecting the USB cable from the unit and computer.
Notes
While the unit is connected to the computer, operations on the unit do not work.
Do not disconnect the USB cable while video files are being transferred.
Do not take out the batteries while the unit is connected to a computer via the USB cable.
Doing so may damage data stored on the unit.
Connecting the unit via a USB hub may not work and is not supported. Connect the USB
cable directly to the computer.
Image Converter 2 or later enables you to convert video files to the proper
format (
page 264) and then transfer them to the internal memory or
“Memory Stick Duo” of the unit—all in one step.
Transferred video files using Image Converter are saved in the “MP_ROOT” folder (
page
186).
Continued
To Next Page
Loading...
Need help?
General