151
“Memory Stick
” Operations
– Except DCR-TRV16
You can specify a recorded still image to print out by putting marks. This function is
useful for printing out still images later.
Your camcorder conforms to the DPOF (Digital Print Order Format) standard for
specifying still images to print out.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Play back the image you want to write a print mark.
(3) Press MENU, then select PRINT MARK in
with the SEL/PUSH EXEC dial
(p. 180).
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to make the menu display disappear. The
mark is displayed
beside the image with a print mark.
To cancel writing of print marks
Select OFF in step 4, then press the SEL/PUSH EXEC dial.
The mark disappears from the image.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot write print marks on still images.
Moving pictures
You cannot write print marks on moving pictures.
While the file name is flashing
You cannot write the print mark on images.
Writing a print mark – PRINT MARK
3
4
MEMORY SET
STILL SET
MOVIE SET
PRINT MARK
PROTECT
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
MEMORY SET
STILL SET
MOVIE SET
PRINT MARK
PROTECT
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
OFF
MEMORY SET
STILL SET
MOVIE SET
PRINT MARK
PROTECT
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
10/1210/12
10/12
MENU
To Next Page
Loading...
Need help?
General
