Sony DHC-AZ1D - Setting the Clock; Selecting a Language

12
GB
Use buttons on the remote for the operation.
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
3 Press . or > repeatedly to set the
hour.
4 Press ENTER.
5 Press . or > repeatedly to set the
minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press . or > to select “CLOCK SET,”
then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 36).
You can change the on-screen display language.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
3 Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
Playback starts automatically if a disc with
auto playback function is loaded. Press x to
stop playback.
4 Press DISPLAY in stop mode.
5 Press < or , repeatedly to select
“Language,” then press ENTER.
6 Press M or m repeatedly to select
“OSD,” then press ENTER.
7 Press M or m repeatedly to select a
language from the displayed list, then
press ENTER.
8 Press DISPLAY to turn off the Setup
Display.
Setting the clock Selecting a language