2
GB
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
This appliance is
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
Note on power cord plug shapes
(Saudi Arabian model only)
For AC 220 V wall sockets:
1 Make the appropriate voltage setting on the
system. (only for models with a voltage
selector)
2 Make sure that the 13 A 3-pin plug (Type
BF) is securely attached to the power cord.
(The 13 A 3-pin plug is attached when
shipped from the factory.)
For AC 127 V wall sockets:
1 Make the appropriate voltage setting on the
system. (only for models with a voltage
selector)
2 Remove the 13 A 3-pin plug using a
screwdriver.
3 Attach the supplied parallel blade plug (Type
A).
WARNING
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
To Next Page
Loading...
Need help?
General
