22
GB
Next, press V/v or the numeric buttons to
select “3”, then press ENTER.
6 To program other tracks, repeat steps 3
to 5.
The programmed tracks are displayed in the
selected order.
7 Press hH to start Program Play.
Program Play starts. When the program
ends, you can restart the same program
again by pressing hH.
Other operations
Tips
• You can do Repeat Play of the programmed tracks.
Press REPEAT/FM MODE repeatedly until “REP”
appears, or set “REPEAT” in the Control Menu
display during Program Play.
• The program you made remains in the system’s
memory even after it has been played back. Press
hH to play the same program again.
Notes
• The displayed number of tracks is the same as that
recorded on the disc.
• You cannot use Program Play with DVDs.
This system memorizes the point where you
stopped the disc so you can resume from that
point.
1 While playing a disc, press x to stop
playback.
“RESUME” appears in the display. If
“RESUME” does not appear, Resume Play
is not available.
2 Press hH.
The player starts playback from the point
you stopped the disc in step 1.
To play from the beginning of the
disc
Press x twice, then press hH.
For a disc containing MP3 audio tracks, press x
one more time to return to the first album.
Notes
• Depending on where you stopped the disc, the
system may not resume playback from exactly the
same point.
• Resume play is canceled when:
– you open the disc tray.
– you change the play mode.
To Do this
Return to normal
play
Press CLEAR during playback.
Turn off the
program menu
In stop mode, press PLAY
MODE/DIRECTION to turn off
the program menu.
Clear the last
programmed
track
Press CLEAR in step 6. The
program is cleared from the last
programmed track.
1
Program
3
4
5
6
7
8
9
10
DISC 3 (MP3) – ALBUM2 – TRACK3
2
Selected album and track
Resuming playback from
the point you stopped the
disc
— Resume Play
To Next Page
Loading...
