Sony DHC-FLX7D - Tape; Loading a Tape; Playing a Tape

Tape
43
GB
1 Press A Z or Z B.
2 Insert a tape in deck A or B.
Note
When the cassette deck is open, the disc tray
does not slide out.
You can use TYPE I (normal) tapes.
1 Load a tape.
2 Press TAPE A/B repeatedly to select
deck A or B.
3 Press PLAY MODE/DIRECTION on the
remote repeatedly to select g to play
one side, j to play both sides, or
RELAY* (Relay Play) to play both decks
in succession.
4 Press hH.
The tape starts playing.
Press hH again to play the reverse side.
When you select
j or RELAY, the deck
stops automatically after repeating the
sequence 5 times.
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side) t
Other operations
Tips
• You can use the digipad for tape operations.
• Pressing TAPE A/B while the power is off
automatically turns the power on.
Searching for the beginning of a
track (AMS*)
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1–9) appear
in the display.
* Automatic Music Sensor
Note
The AMS function may not operate correctly under the
following circumstance:
– When the unrecorded space between songs is less
than 4 seconds long.
Tape
Loading a tape
Playing a tape
Insert with the
side you want
to play/record
facing forward.
BA
To Do this
Stop playback Press x.
Pause playback Press X. Press again to resume
playback.
Fast-forward Press M while playing the front
side or press m while playing
the reverse side.
Rewind Press m while playing the front
side or press M while playing
the reverse side.
BA
Example: searching forward 2 songs