Sony DHC-FLX7D - Recording to a Tape; CD Synchro Recording;High; Speed Dubbing;Recording

44
GB
You can record from a disc, tape (or connected components) or radio. You can use TYPE I (normal) tapes.
Other operations
* Only when recording manually.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B and press hH
repeatedly to start playback of the reverse side after
step 1. Press x where you want to start recording.
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• (High-Speed Dubbing only)
If you set direction to
j when the tapes have
different lengths, the tapes in each deck reverses
independently. If you select RELAY, the tapes in
both decks reverse together.
• (CD Synchro Recording only)
When you want to record an album from an MP3
disc, be sure to press PLAY MODE/DIRECTION on
the remote repeatedly to select ALBM, then press
ALBUM + or – while pressing SHIFT on the remote
to select the desired album before proceeding.
Notes
• You cannot open the disc tray and the cassette deck
at the same time.
• You cannot listen to other sources while recording.
• You cannot use the digipad during recording.
• If you start recording with 2.1CH/MULTI set to
MULTI mode, the setting automatically changes to
2.1CH mode in step 4.
Note on recording from Super Audio CDs
Recording the HD layer of a Super Audio CD is not
possible on this system. However, the CD layer can be
recorded the same as a normal CD.
Recording to a tape
— CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program Edit
Step
Recording from a VIDEO
CD/CD/Super Audio CD/MP3
file (CD Synchro Recording)
Recording from a tape
(High-Speed Dubbing)
Recording Manually
1
Insert a recordable tape into deck B.
2
Press DVD. Press TAPE A/B repeatedly
to select deck A.
Press a function button
for the recording source.
3
Insert the disc you want to
record.
Insert the tape you want to
record into deck A.
Load the disc/tape (or
other audio source), or
tune in the station you
want to record.
4
Press CD SYNC HI-DUB. Press REC PAUSE/
START.
Deck B stands by for recording.
“” flashes.
5
Press PLAY MODE/DIRECTION on the remote repeatedly to select g to record on
one side. Select j (or RELAY) to record on both sides.
6
Press REC PAUSE/START.
Recording starts.
7
Start playing the
recording source.
To Press
Stop recording x.
Pause recording* REC PAUSE/START.