DP-RF6000
US Model
Canadian Model
AEP Model
Korea Model
SERVICE MANUAL
DIGITAL SURROUND PROCESSOR
Sony Corporation
Personal Audio Division
Published by Sony Techno Create Corporation
9-887-076-01
2006B02-1
© 2006.02
SPECIFICATIONS
Ver. 1.0 2006. 02
Decoder functions Dolby Digital
Dolby Pro Logic II
DTS
MPEG-2 AAC
Virtual surround function OFF
CINEMA
MUSIC
Compression function OFF
ON
Modulation System DSSS
Carrier wave frequency 2.412 ~ 2.462 GHz (US, Canadian)
2.412 ~ 2.472 GHz (AEP)
2.417 ~ 2.467 GHz (Korea)
Transmission distance Approx. 30 m (100 ft) of longest
Frequency response 12 – 22,000 Hz
(digital input, sampling frequency 48 kHz)
Distortion rate 1% or less (1 kHz)
Audio inputs Optical digital input
(rectangular-type) × 1
Analog input (pin jack left/right) × 1
Audio output Optical digital output
(rectangular-type) × 1
Power requirements DC 9 V
(from the supplied AC power adaptor)
Dimensions Approx. 182 × 38 × 182 mm
(7
1
/
4
× 1
1
/
2
× 7
1
/
4
in) (w/h/d)
Mass Approx. 345 g
(12.17 oz)
Design and specifications are subject to change without notice.
• The DP-RF6000 is the digital surround
processor that comprises the MDR-DS6000.
• MDR-DS6000 consists of the following models respectively.
Cordless stereo headphone MDR-RF6000
Digital surround processor DP-RF6000
* The digital surround processor for this system incorporates the Dolby Digital decoder, the Dolby Pro Logic II
decoder, the DTS decoder and the MPEG-2 AAC decoder.
Manufactured under licence from Dolby Laboratories and Digital Theater Systems, Inc.
“Dolby,” “Pro Logic,” the “AAC” logo and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS VIRTUAL ” are trademarks of Digital Theater Systems, Inc.
To Next Page
Need help?
General