Sony DPS-D7 - Lcl.MIDI

Parameter
Variation
Range for LCL.
MIDI
The parameters will be changed
within the range as shown
in the table below
when
you
enter one
of
the
control change
number 0
-
127
Parameter variation range
for the Delay block
Parameter
Algorithm
Range
time STD, FBD, DBD,
TPD, LGD, PTD,
MTD Set
value
—128
words
-
Set
value +126 words
level FBD, DBD,
TPD, LGD, PTD, MTD
0%
-
Set value
phase FBD, DBD, TPD, LGD,
PTD, MTD
Control change data
=
normal if 0
-
63
=
inverse if 64
-
127
EQ
freq FBD, DBD, LGD, MTD
Set value
—
16/6oct.
-
Set value +15/6oct.
EQ
level
FBD,
DBD, LGD,
MTD
0 dB
-
Set
value
EQ
q
LGD, MTD
0.267
-
34.64
Parameter variation range for
Input/Output block
Parameters
Range
level
0%
-
Set
value
phase
Control change data
=
normal if 0
-
63
=
inverse if
64-127
panpot
0%
-
Set
value
panpot
limit
min Set
value
-
set
value for panpot
limit max
(*)
panpot limit max Set value
for panpot limit min
-
set value
(**)
*
In case you change the panpot limit
min using
LCL.
MIDI
so that panpot is equal to
or smaller than the panpot
limit
min, the panpot is also changed to the value
of the panpot
limit min.
**
In
case
where you change
the panpot
limit max using
LCL.
MIDI so that
the panpot is equal to or
larger than the
panpot
limit max, the panpot
is also changed to the value
of panpot limit max.
36
APPENOIX
B