20
Attaching the shoulder strap and the
lens cap
Attaching the lens hood
When you shoot in bright lighting
conditions, such as outdoors, we
recommend that you use the lens hood to
reduce the image quality deterioration
caused by unnecessary light.
1 Attach the adaptor ring.
2 Position the lens hood as shown below and
turn the lens hood clockwise until it clicks.
• You can attach the lens cap with the lens hood
attached.
• When using the lens hood, be careful that the
following:
– The AF illuminator light may be blocked.
– The flash light may be blocked, causing the
shadow to appear when using the built-in
flash.
To Next Page
Loading...
Need help?
General
