[86] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and
then to lighter. Press and hold down the shutter button until the bracket recording is
completed.
You can select an image that suits your intention, after recording.
1. MENU→ (Camera Settings) → [Drive Mode] → [Cont. Bracket].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Cont. Bracket: 0.3EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 0.3 EV.
Cont. Bracket: 0.3EV 5 Image:
This setting shoots five images continuously with an exposure value shifted by plus or minus
0.3 EV.
Cont. Bracket: 0.3EV 9 Image:
This setting shoots nine images continuously with an exposure value shifted by plus or
minus 0.3 EV.
Cont. Bracket: 0.7EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 0.7 EV.
Cont. Bracket: 0.7EV 5 Image:
This setting shoots five images continuously with an exposure value shifted by plus or minus
0.7 EV.
Cont. Bracket: 0.7EV 9 Image:
This setting shoots nine images continuously with an exposure value shifted by plus or
minus 0.7 EV.
Cont. Bracket: 1.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 1.0 EV.
Cont. Bracket: 1.0EV 5 Image:
This setting shoots five images continuously with an exposure value shifted by plus or minus
To Next Page
Loading...
