4. Select the desired function by pressing the up/down/left/right side of the control wheel.
5. Turn the control wheel to select the desired setting.
Performing settings on the dedicated screen
Select the desired function in step 4, then press on the center of the control wheel. The
dedicated setting screen for the function appears. Follow the operating guide (A) to perform
the settings.
Note
Gray items on the Quick Navi screen are not available.
When using [Creative Style] or [Picture Profile], some of the setup tasks can be
accomplished only on a designated screen.
[23] How to Use
Shooting Shooting still images/movies
Shooting still images
Shoots still images.
1. Set the shooting mode to (Auto Mode).
To Next Page
Loading...
