You can use a smartphone as the remote controller for this product, and shoot still
images/movies. The application PlayMemories Mobile must be installed on your smartphone.
1. MENU → (Application) → [Application List] → [Smart Remote Embedded].
2. When the product is ready for the connection, an information screen appears on the
product. Connect the smartphone and the product using that information.
Connection setting methods differ among smartphones.
3. Check the composition of the image on the smartphone screen, and then press the
shutter button (A) on the smartphone to shoot an image.
Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].
Note
When you record movies using a smartphone as a remote controller, the monitor of the
product becomes darker. Also, you cannot use the viewfinder for still image/movie
recording.
This product shares the connection information for [Smart Remote Embedded] with a
device that has permission to connect. If you want to change the device that is permitted
to connect to the product, reset the connection information by following these steps.
MENU → (Wireless) → [SSID/PW Reset]. After resetting the connection information,
you must register the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are
subject to change without notice.
To Next Page
Loading...
