Allows you to shoot still images with the desired exposure by adjusting the exposure (both
the shutter speed and the aperture value (F value)).
MR (Memory recall):
Allows you to shoot an image after recalling often-used modes or numeric settings
registered in advance.
(Movie):
Allows you to change the setting for movie recording.
(High Frame Rate):
Allows you to shoot slow motion movies. Select a frame rate higher than the playback frame
rate to shoot smooth slow motion movies.
(Sweep Panorama):
Allows you to shoot a panoramic image by compositing the images.
SCN (Scene Selection):
Allows you to shoot with preset settings according to the scene.
[26] How to Use Shooting Selecting a shooting mode
Intelligent Auto
The camera shoots with automatic scene recognition.
1. Set the mode dial to (Auto Mode).
2. MENU → (Camera Settings) → [Auto Mode] → [Intelligent Auto].
When [Mode Dial Guide] is set to [On], you can select the desired settings after you
have changed the position of the mode dial.
3. Point the camera to the subject.
When the camera recognized the scene, the icon for the recognized scene appears on
the screen.
4. Adjust the focus and shoot the image.
Note
To Next Page
Loading...
